PESET 1000 ETPAK (SLIVPAK)

PUPROSE OF THE MACHINE

AUTOMATIC MINI LINE FOR BOTTLES PACKAGING - PESET 1000 ETPAK (SLIVPAK) - This automatic line consists of two machines: PERPAK 1000 (washing out and disinfection of the bottles), SEBOPAK 1000 (valve filling, sorting and winding of closer and stamp date) and TERMOPAK 400 A1 (group packaging into thermocontracting phoil).

PS 1000

PURPOSE OF THE MACHINE

AUTOMATIC MINI LINE FOR BOTTLES PACKAGING - PS 1000 - This automatic line consists of two machines: PERPAK 1000 (washing out and disinfection of the bottles), SEBOPAK 1000 (valve filling, sorting and winding of the closers and stamp date).

PS 1000 S clean

PURPOSE OF THE MACHINE

AUTOMATIC MINI LINE FOR BOTTLES PACKAGING - PS 1000 S clean- This line is constructed for glass bottle filling.

A complete mini line is enclosed , under overpressure control provided by HEPA filters.

ST 1000

PURPOSE OF THE MACHINE

AUTOMATIC MINI LINE FOR BOTTLES PACKAGING - ST 1000 - This automatic line consists of two machines: SEBOPAK 1000 (valve filling, sorting and winding of the closers and stamp date) and TERMOPAK 400 A1 (group packaging into thermocontracting phoil).

PERPAK 1000

PURPOSE OF THE MACHINE

PERPAK 1000 is an automatic machine for cleaning and sterilization of the bottles for the packaging lines.

The machine can work even independently with an transporter added, which brings bottles in and out of the machine. The oval horizontal construcion makes easy adjustment and clear approach to the vital parts of the machine.

SEBOPAK 1000

PURPOSE OF THE MACHINE

Packaging machine SEBOPAK 1000 is designed for dosing, filling, closing and dateing of plastic bottles. Dimension of the machine are special occasional for bottles with wider throat, for packaging all kind of soft drinks whose are useful in milk industry, chemical industry, industry of juice etc. (can be used standard throat, too). This machine can packing bottles in two quantity, with max volume of 1 litre, with necessary setup of specific parametars.

SLIVPAK 1000

PURPOSE OF THE MACHINE

This semi-automatic tunnel is designed for sleeving bottles which is previously positioned with sleeve. This sleeve have capabillity of thermal shrink, and in this way the sleeve is on the poduct and give them final look. SLIVPAK 1000 is provided for work in line or as independed machine. Water vapor as an energy source can be provided alone (unless the user has a boiler room) or the machine can deliver a steam generator.

TERMOPAK 400 A1

PURPOSE OF THE MACHINE

This automatic line is designed for individually and group packaging products into foil, which have ability of termic contraction, at the same time cohere on the product and made protection form exterior influence. At the gorup packaging realising great homogeneity of the pack. Machine TERMOPAK 400 A1 is especially intended and designated for group packaging of bottles.

Pak 12000 - Air knife

PURPOSE OF THE MACHINE

Air knife ’’PAK 12 000’’, the main purpose of the machine is that through a thin film of air removes dirt and moisture from the packaging of any type or format.

The machine is completely tested at the factory, Pak promet.


ETPAK RF - Roll Feed

PURPOSE OF THE MACHINE

The circular labeling machine ETIPAK RF (Roll Fed) with 9 (nine) nests for labeling with complete wrapping PP labels (polypropylene) and glued with hot glue (hot melt) at its end. Mechanical is more compact and suitable for smaller production plants. The design is according to all the standards of the European Union (EC) and simple to operate and maintain..

KARLLVILE - Shrink Sleeve

PURPOSE OF THE MACHINE

1. Sleevepro - Automatic machine for application of thermo shrink label on bottles.

On machine there are following units: Bottle divider, unwind device, rotary knives, format parts (bullet), and application device.