BLOK 6000 F clean

PURPOSE OF THE MACHINE

BLOK 6000 F clean - is automatic line used for disinfection, flowmetric filling and closing the bottles. On the line is quiet possible to fill all the fluids in the PET bottle with wide neck and screw cap volume of 0.25 to 2 liters. It consists of rinser, filling machine, capper and conveyors wich connecting these parts. The line has a unique drive, the transfer is by swivel joint, and speed of machine can be changed with frequency controller. 

The entire machine is armored and is in the overpressure of sterile air, which provides for HEPA filters. The line is controled by PLC, and by function of machines accessed via touch screen. All machines in this line are designed as a carusel, horizontal, allowing easy adjusting and easier access to vital parts of the machine. All elements of the machine wich coming into contact with the liquid to be packed up and packaging, and all protective coverings are made of stainless steel. Stands machines and plant components are made of structural steel. The command part is placed in the electrical closet that the door seal is protected from humidity.

TECHNICAL DESCRIPTION

Bottles in the work zone machine lead by transporter where they separate input progressive snail that is in synchronization with the input star of bottles on washing machine. Inlet stars bring one by one bottle into machine impeller, where they accept the clamps which grasp the bottle in the area of cervical bottles, rolling over the nozzle system disinfectant bottle. At the end of the disinfection process, bottle are rolling over in a normal position and the outlet star is back on the conveyor, who bottle driven by screw conveyor refers to the filling machine where the inlet star is bring into the charging process. Flowmetrc filling providing high accuracy dosing. This system can be adjusted to fill yogurt with fruit pieces. Rotary charger is equipped with sensors for control the liquid level in the tank, regulaton flow of liquids and an automatic washing machine. Dosing system is washed inside and out. That is provided using a false bottle.wich prevent unnecessary spraying of CIP funds on the machine. At the end of the filling, output star taken off the bottles on the conveyor, where the screw conveyor lead them to the closing machine, and using the star system and head for bandaging, on the bottle was placed and wrapped a cork. The head of the closure mechanism is cogged conected over run mechanism and each head, by friction and by spring, can be arrange by wished speed of close. The cover selector has its own run mechanism which can change the speed.

TECHNICAL CHARACTERISTICS

- capacity Q = 6000 bottle / h
- dosing range 0,25 - 2 lit
- engage power Pi = 6.7 kW
- electrical feed U = 3 x 380 V  50 Hz
- air pressure P = 6 - 8 bar
- consumption of the air 1000 Nl / min
- dimensions L x W x H 7500 x 1650 x 3200 mm
- mass of the machine M = 4320 Kg
- height of bottle
160 mm - 300 mm
- diameter of bottle Φ = 110 mm