TERMOPAK 12000 W

PURPOSE OF THEMACHINE

TERMOPAK 12000 W - This line is designated for single and group foil packaging. This foil is thermo contract type, coheres at product, that protects from the outer infulence. The group type of packaging makes good homogenic efect of products packaged. There are vast variety of product that can be packaged this way, but the most common use is for the packaging of bottles, boxes, pouches, etc. in the alimentary and hemical industry, especially for mass production products. Such packages can be easily and safely stored and properly maintaned, all the way to the customer.

Line TERMOPAK 12000 W is specially adapted for the overpack brick-pack, bottle and pure-pack packing.

TECHNICAL DESCRIPTION

Thermo contraction foil enfold line TERMOPAK 12000 W is automatic, and consist of many units – modules, that makes an stable functional whole.

Filled and closed bottles are moved to the machune by transporter, where are accepted by inlet modular transporter.Moving to the mixer and longitudaly guideline, bottles start disposing by width of modular transporter and filling all column by longitudaly guideline.The bottles which are polarized and arranged, move to the stopper. Alternatiely work of anterior and posterior stopper acheive devoting of group of bottles into requesed format. Package of bottles move forward by modular transporter and strike at chain transporter transom. The transom is moving slowly than modular tape, so it keeps package which still gets form, supporting by lateral lateral and longitudal limit stop bottles crossing from one to second column. Guided in that way package move to the modular transporter, where is stopping panel. Bottles in formed disposal stay at panel while transom goes forward. The next transom of chain transporter, which support and guide next package, move to the first package, which is at stoped panel and push it through foil film. In the same time this transom leave next package at stop panel.

When package pass off under the iron and unwinding of foil, in that moment starting belt transporter which is situated behind iron sopporter, and helping to position package in condition for welding of foil. Welding in foil wraparound system where it also puts the film unwinding from the roll. Going through the film, anchor package runs, which start motion through microswitches and unwrap the foil from coil. This formed package comes on the conveyor, wich carries it through the chamber, where the process takes about thermal shrinkage foil packets.Upon leaving the chamber package comes under the current of cold air, where he received the ultimate strength and shape. Cooling unit is situated just behind the thermo contraction chamber, and its purpose is to quickly cool the foil that enrols the package.

The cooling process is done by the cold air supplied by the fan. Pickup transporter constructed as gravitational roller, is situated at the extend of the wired transporter. The angle pitch is small, so the packages arive and push one another, that makes small accumulation. The packages are cooled and stable, so they are not deformed or distort.

TECHNICAL CHARACTERISTICS

- capacity Q = 30 cikl / min
- engage power
Pi = 24 kW
- electrical feed U = 3 x 380 V 50 Hz
- air pressure
P = 6 - 8 bar
- air consumption (at 6 bar-s) 300 Nl / min
- dimensions L x W x H 14200(8600) x 1700(4800) x 1800 mm
- mass of the machine M = 3880 Kg
- bottles layout in the package 3х2  –  6х4
- foil type Thermo contract PE
- width of the phoil (maximum) B1 = 580 mm
- foil thickness 0,04 - 0,09 mm

Where are we?