MONOPAK 1500 10 P clean

PURPOSE OF THE MACHINE

MONOPAK 1500 10 P clean - is the automatic machine for packaging liquid products and creams in polystyrene containers which are closed with pop up polystyrene lids in the zone of overpressure. Most mass use of this machine has the lines for the packaging of dairy products in volumes ranging from 0.70 to 1.00 liters in a container with a pop up lids capacity of 1500 pieces per hour.

The concept of such a machine, to perform in an automatic cycle synchronized functions: taking the vessel out of the charger with the treatment of UV lamps, dispensing with the measurement of overpressure, taking the lid from the drum with the treatment of UV lamps, lower lids, charging lids, ink-jet date marking and disposal full glass of the closed-carrying rotary table.

TECHNICAL DESCRIPTION

This single-line, horizontal machines which is working in stroke mode, and the drive type and method of operation is a combination of mechanical and pneumatic mechanisms - modules.

Moto-reducer machine drives, which runs through the distributor main shaft drive machine, and stepper gear carriers. On separating gear sprocket is with safety pins, which keeps the machine from overloading. The role of inter-phase connecting all elements of the machine cycle is conveyor, which carries the glass from one mechanism to another, until the bouncer who was glass on the reception desk where the worker collects them and collectively packaged. The conveyor belt consists of two hinge chain, with special "pusher," which provides precise positioning of containers during the cycle. Transporter is set to own base in which there is a mechanism for raising and lowering, which adjusts the height of the tape in relation to the amount of container to be filled. When a full tank of 0.7 liters transporter is placed in the upper position, while the liter container down below. Drive a pickup electric.

The treatment of container and cap with UV lamps and dosage zones are located in a shielded area of the machine and overpressure (see sketch). Dosage is a piston with a volumetric measurement quantities, a power feeder is made from a container that is located on the machine. CIP is fully working automated and, a four valve (see illustration) are an integral part of the machine. Base machine, protective coverings, and other elements that come into contact with matter, which is packed are made of stainless steel. With the machine comes complete documentation (instructions for use and maintenance of electrical and pneumatic schematics and beliefs) and a set of spare parts.

The machine comes with Travers and ink-jet printer, as well as the mechanism for setting pop up PVC covers.

TECHNICAL CHARACTERISTICS

- capacity Q = 1500 cans / h
- dosing range 0,7 - 1,0 l
- engage power Pi = 1,30 kW
- electrical feed U = 3 x 380 V 50 Hz
- air pressure P = 6 - 8 bar
- air consumption (at 6 bar) 850 Nl / min
- dimensions L x W x H 3100 x 1300 x 2300 mm
- weight M = 1480 Kg
- vessel diameter wreath D = per sample

Where are we?