MONOPAK 3000 10 P clean
PURPOSE OF THE MACHINE
MONOPAK 3000 10 P clean - is automatic machine for packaging liguid products, creams and polystirene cups, which closed with polystirene pop up lids.
The massive application of this machine is on the lines for packaging sour - milk products in volumes of 0,70 till 1,00 litres, and the capacity is 3000 pieces per hour.
The concept of this machine is such that in the automatic cycle there are few synchronized functions performed: the take over of the cups from the magazine, treatment with UV lamps, dosing with measuring in the pressure, taking lids from the magazine, treatment with UV lamps, putting and closing (press) lids, ink-yet date stamp, and displacing full and closed dishes at the reception table.
This is two serial, line horyzontal machine which works in tact mode of operation and according to kind of drive and way of functioning, this machine represents combination of mechanical and pneumatic mechanisms-modules.
Motoreductor moves the machine, which over splitter drive moves the main beam of the machine and pitch gear of trensporter. On the split reductor is wheel with safety pin, who keep the machine of overcharge. Conveyor has the role of interphase connecting all the elements of the ciclus of the machine, that is transfer, which spread the cups from one to another mechanism , to cup ejector which finally ejects it onto reception table, from where worker collects them and packs The transporter consists of movement chain, with special pushing element, which pecisely position the dishes. Transporter is located on its own stand in which the mechanism for raising and lowering, which adjusts the amount of tape in relation to the amount of containers that are full. When the full containers of 0,7 litres of carrier is in the top position, and the l vessels of 1,0 litres down below.The lift mechanism is run by the electromotor. Treatment of vessels and lids with UV lamps as a zone located in the dosage of the armored machines, and pressure zone (see picture). The dosage is the piston, with a cubical measuring quantity, and the doser supply is from the vessel situated at the machine. Washing CIP is fully automated, and working four valves (see picture), are an integral part of machinery. Mount machines , preventive coverings, and other elements which comes to contact with liquid are made of stainless steel.
With the machine comes complete documentation (instructions for handling and maintenance of the electrical and pneumatic schemes and beliefs) as well as spare parts. Machine can be deliverd with spear ink-jet date stamp.
|- capacity||Q = 3000 cans / h|
|- dosing range||0,7 - 1,0 l|
|- engage power||Pi = 1,30 Kw|
|- electrical feed||U = 3 x 380 v 50 Hz|
|- air pressure||P = 6 - 8 bar|
|- air consumption (at 6 bar-s)||
850 Nl / min
|- dimensions L x W x H||3300 x 1300 x 2300 mm|
|- mass of the machine||M = 1550 Kg|
|- outer dish diametar||D = per sample|