MONOPAK 4500 05/02

PURPOSE OF THE MACHINE

MONOPAK 4500 05/02 - is automatic machine for packaging liquid products and creams into polystirenic or polypropylene small cups. The massive application of this machine is on the lines for packaging sour milk products and cream cheese, in volumes from 0,10 to 0,5 liters. Machine is with changeable cups, dosers, taking cups and lids for packaging in cups from 02 and 05 litres Transition from one packing to another is up to 10 (ten) minutes.

The conception of this machine is such, that in automatic process synchronized functions are performed: taking the cups from clip, dosing with measuring, taking the lids, welding the lids, date stamp and putting full and closed cups on reception table. Level of automatization allows minimal involving of workforce, and large capacity ensures cost-effectiveness of the fast.The conception of this machine is such, that in automatic process synchronized functions are performed: taking the cups from clip, dosing with measuring, taking the lids, welding the lids, date stamp and putting full and closed cups on reception table. Level of automatization allows minimal involving of workforce, and large capacity ensures cost-effectiveness of the fast.

TECHNICAL DESCRIPTION

This is three serial , line horyzontal machine which works in tact mode of operation and according to kind of drive and way of functioning, this machine represents combination of mechanical and pneumatic mechanisms-modules.

Motoreductor moves the machine, which over splitter drive moves the main beam of the machine and pitch gear of transporter. On the split reductor is wheel with safety pin, who keep the machine of overcharge. Conveyor has the role of interphase connecting all the elements of the cycles of the machine, that is transfer, which take up the cups from one to another mechanism , to cup ejector which finally ejects it onto reception table, from where worker collect them and packs.

The dosage is the piston, with a cubical measuring of quantity. Energize of doser can be observe from the dish, which is located on the machine. Mount machines , preventive coverings, and other elements which are in contact with substance for packaging, are made of stainless steel. The machine is delivered with wetl (impresses) date.

With the machine comes complete documentation (instructions for handling and maintenance of the electrical and pneumatic schemes and beliefs) as well as spare parts.

With this conception you can get high reliability and simplicity of the machine, which is reflected in easy maintenance and adjustemnt, as well as short-time service.

TECHNICAL CHARACTERISTICS
 
- capacity of the machine Q = 4500 cups / h
- dosing range 0,10 - 0,5 l
- power Pi = 2,50 kW
- nominal voltage 3 x 380 V  50 Hz
- nominal pressure p = 6 - 8 bar
- air consumption (at 6 bar-s) 380 Nl / min
- dimensions L x W x H 3300 x 1280 x 2300 mm
- weight M = 1350 Kg
- diameter of wreath for thermoweld cups D = 75 and 95 mm