We have been producing packaging machines for 35 years.

MONOPAK 1500 – 3000 10 P

PURPOSE OF THE MACHINE

MONOPAK 1500 – 3000 10 P – is the automatic machine for packaging liquid products and creams in polystyrene containers which are closed with pop up polystyrene lids in the zone of overpressure. Most mass use of this machine has the lines for the packaging of dairy products in volumes ranging from 0.70 to 1.00 liters in a container with a pop up lids capacity of 3000 pieces per hour.

The concept of such a machine, to perform in an automatic cycle synchronized functions: taking the vessel out of the charger with the treatment of UV lamps, dispensing with the measurement of overpressure, taking the lid from the drum with the treatment of UV lamps, lower lids, charging lids, ink-jet date marking and disposal full glass of the closed-carrying rotary table.

TECHNICAL DESCRIPTION

This single-line or double-line, horizontal machines which is working in stroke mode, and the drive type and method of operation is a combination of mechanical and pneumatic mechanisms – modules. Moto-reducer machine drives, which runs through the distributor main shaft drive machine, and stepper gear carriers. On separating gear sprocket is with safety pins, which keeps the machine from overloading. The role of inter-phase connecting all elements of the machine cycle is conveyor, which carries the glass from one mechanism to another, until the bouncer who was glass on the reception desk where the worker collects them and collectively packaged. The conveyor belt consists of two hinge chain, with special “pusher,” which provides precise positioning of containers during the cycle. Transporter is set to own base in which there is a mechanism for raising and lowering, which adjusts the height of the tape in relation to the amount of container to be filled. When a full tank of 0.7 liters transporter is placed in the upper position, while the liter container down below. Drive a pickup electric.

The dosing is piston, with volumetric measuring of the quantity, and the dosing is supplied from the dosing pot located on the machine. CIP washing is completely automated.

TECHNICAL CHARACTERISTICS

– capacity Q = 1500 – 3000 dishes / h
– dosing range 0,70 – 1,00 l
– engage power Pi = 0,75 – 1,30 Kw
– electrical feed U = 3 x 380 v  50 Hz
– air pressure P = 6 – 8 bar
– air consumption (at 6 bar-s) 850 Nl / min
– dimensions L x W x H 3100 (3300) x 1200 (1400) x 2700 mm
– mass of the machine M = 1250 – 1430 Kg
– outer dish diametar D = per semple

TECHNICAL DOCUMENTATION

Download the brochure – MONOPAK 1500 10 P

Download the brochure – MONOPAK 3000 10 P